Merchant Quick 3D Work with us
Close-up of a 3D printed lamp in orange, showing its fine printed layers
B2B only · For businesses, not retail customers

Sell more products. Hold no stock.

We design and 3D print products for your brand, on demand. You sell them; we print them as you need them, from one piece.

Product development

Prove your product before you pay for a mould.

An injection mould costs thousands and takes weeks; change the design afterwards and you pay again. We print your product from one piece up, so you can test it, sell it and improve it first. When the design and the demand are proven, you take it to injection moulding.

  1. 01 1 pc

    Prototype

    Hold the real thing in your hand. Change the design and print it again in days, not weeks.

    We print
  2. 02 10 – 1,000+ pcs

    Small batch

    Put it in front of customers, sell the first run, and fix what they tell you between batches.

    We print

What we make

Six kinds of work, all printed in PETG in our workshop. These are example parts; yours are made to your drawing, size and colours.

Printing replaces the mould. That means no set-up cost, no minimum order, and a part that wears out can simply be printed again.

Minimum order
1
Tooling cost
RM 0
Layer height
0.2 mm
On demand

Print exactly what is needed, when it is needed, with no tooling to pay for first.

Local

Designed and printed in our Malaysian workshop. No container, no customs, no factory you have never seen.

Circular

We keep the file. Worn parts are printed again; retired ones can come back to us. Ask about recycling.

Any colour

PETG in six stocked colours, translucent or solid, and more on request.

A row of printed table lamps in different colours on a shelf

Make and re-make in one workshop.

Printed in Malaysia
  1. 01

    Send a photo or sketch

    WhatsApp
  2. 02

    We model it and quote

    3D model & price
  3. 03

    One sample to check the fit

    Sample first
  4. 04

    Batch it, reprint any time

    Reorder any time
On demand

Order when you need it.
Not a warehouse full.

Instead of buying a container of stock and storing it, keep your parts on file with us and order what this month needs. Sell out, and you reorder; change the design, and the next batch is the new one.

  • Every part we make stays in your part library
  • Reorder any quantity, from one piece
  • No warehouse, no dead stock, no minimum
  • Change the design between orders

New process,
new possibilities.

Ribbed 3D printed lampshade printed as a single thin wall Form

Ribs, lattices and curves that a mould cannot make, in a single printed wall.

Six 3D printed round lamps in a row, each in a different colour Product

Change the design between batches, with nothing left over in a warehouse.

3D printed wall sconce made of separate parts that can be reprinted Repair

Print one broken part again instead of replacing the whole fixture.

Our projects

Products we design and print ourselves, taken from the first idea to a boxed product on the shelf. It is the same path we take your product along.

  1. 01

    Concept

    An idea, a sketch, or a photo of something close to it.

  2. 02

    Design

    Modelled for printing: wall, angles, and how the parts join.

  3. 03

    Prototype

    One printed piece to hold, use and test.

  4. 04

    Improvement

    Changed and printed again until it is right.

  5. 05

    Production

    Small batches, from ten to a thousand pieces or more.

  6. 06

    Packaging

    Boxed for the shelf, including blind boxes for collectible ranges.

    Blind box
Raised pet feeder in gray and white, holding a steel bowl
Project 01 · Mochi Mochi

The raised pet feeder.

A ribbed base and a smooth top that meet on a wave, lifting the bowl off the floor. Printed in two parts, in any two of our colours, from a single piece to a full shelf.

Size
185 × 185 × 105 mm
Parts
Base and top, printed separately
Bowl
Takes a removable bowl in the top ring
Material
Matte PLA
See Mochi Mochi
Challenge
  • Lift the bowl to a comfortable height without a tall, tippy stand.
  • Let the bowl come out for washing.
  • Two colours on one product, from a single-colour printer.
Solution
  • A wide base, 185 mm across and 105 mm tall, narrowing to the bowl ring.
  • A top ring that holds a standard steel bowl, which lifts out.
  • Base and top print as separate parts and meet on a wave, so each can be any colour.
Outcome
  • Three colour combinations ready to show, and any two of our colours on request.
  • Printed from a single piece to a full shelf, with no mould.
  • Sold under our own brand, Mochi Mochi, at mochimochibowl.com.
Kasa table lamp from the Hakumei range, printed as a single thin wall
Project 02 · Hakumei

Hakumei, printed lamps.

Lampshades printed as one wall thinner than half a millimetre, so the light comes through the material itself. Table lamps, pendants and wall sconces, built from parts that come apart.

Wall
One 0.42 mm wall
Parts
Joined by magnets, swap by colour
Sizes
Small, medium and large
Material
Translucent and matte PLA
See the Hakumei range
Challenge
  • A lampshade that glows through its own material, not one that only holds a shape.
  • A single thin wall cannot lean more than 45 degrees, on either face, or it sags in the print.
  • The tallest shades are larger than the printer's bed.
Solution
  • Every shade prints as one 0.42 mm wall of translucent PLA.
  • Each silhouette is checked against the 45-degree limit before it is printed.
  • Lamps are built from parts joined by magnets, and large shades split on a hidden lip.
Outcome
  • Hakumei: a range of table lamps, pendants and wall sconces in three sizes.
  • One base fits every table-lamp design, so a shade or a colour can be swapped.
  • Every part is also sold on its own, and reprinted from its file.

Made for the places
you run.

Five 3D printed table lamps in different shapes and colours on a sideboard

Retail

Fixtures that change as often as the shelf does. Print a run for one store, change the design for the next.

  • Shelf talkers
  • Display risers
  • Price-tag holders
  • Shelf dividers
Ask about a part

Questions

Do you sell to individual customers?

No. Quick 3D Merchant is business to business. We work with shops, cafés, restaurants, hotels, offices, brands and product start-ups, not retail customers.

Can I sell Hakumei or Mochi Mochi products?

No. Hakumei and Mochi Mochi are our own projects, and we do not run a reselling programme. We design new products for your brand instead.

Do I need to keep stock?

No. We keep your print files in your part library, so you order what you need when you need it, from one piece, instead of buying a large run and storing it in a warehouse.

What is the minimum order?

One piece. Printing needs no mould, so there is no tooling cost and no minimum order. The same part can be printed again whenever you need more.

Do you do injection moulding?

No. We print your product as prototypes and small batches, from one piece to a thousand or more, so you can test it, sell it and improve the design first. When the design and the demand are proven, you take it to an injection moulder for volume.

What can you make?

Shop fixtures such as shelf talkers and display risers, furniture such as side tables and stools, lighting, pet products including our raised pet feeder, planters and pots, and branded merchandise such as keychains and clickers.

What material do you print in?

PETG, in six stocked colours, translucent or solid, with more colours on request.

How do I get a quote?

Send a photo or a sketch of what you need on WhatsApp. We model it and quote, then print one sample for you to check the fit before the batch.

Where are you based?

Our workshop is in Malaysia, and we design and print everything there for businesses across Malaysia.

Have a part in mind?
Send us a photo.

We work with businesses only: shops, cafés, hotels, offices, brands and product start-ups.

WhatsApp +60 18-574 9582